The flying table
“The Boeing Stearman wing revealed”

- Based on the airfoil of Boeing Stearman
- Precisely hand-made and focused on details
- Fully customizable
- Glass top can be firmly attached to the spars by six or eight attachment points.
The flying table
Medium size- Mahogany
lumber - 9 ribs
- Solid legs
- Diagonal wiring
- Glass top
The flying table
XL size- Mahogany
lumber - 13 ribs
- Solid legs
- Diagonal wiring
- Glass top
Tables shorter than 1.4m don’t have diagonal wiring, unless it’s requested. The reason is that the tools I have for creating the connections are designed to be used with standard 2.5 or 3mm wire that is used on airplanes. Wires with smaller diameter require different tools which I don’t have in my shop at the moment.
As it would be very risky to send the glass top, I provide this table without it. If you are interested, I will send a drawing in PDF form, according to which you can have the glass cut by a local glass cutter, who will deliver it to your home and glue it to the pre-prepared points on the spars.
Tables can be shipped worldwide (like all products from my offer) and you will need basic tools to assemble them. I will be always available to asist you when you need help.
Send request
Cell phone / WhatsUp
+420 775 026 559
company@historicpropellers.com
Václav Stržínek
VAT ID 04926196
Jesenského 4220/215
06901 Snina
Slovakia
Central Europe
Registered company since 2011
@HistoricPropellers
facebook.com/HistoricPropellers
Historic Propellers | © 2012 -